DO88 PERFORMANCE – INTERCOOLER KIT + PIPE KIT 2.0 TFSI TSI EA888.3 MQB GEN3

Description

The best high performance intercooler kit AUDI SEAT SKODA VW 1.8 / 2.0 TSI (MQB) on the market!

This BigPack includes both the do88 high performance intercooler and the hose kit.

This kit is for you with high power lenses and want to upgrade to the absolute best! Just switching to our high performance intercooler is a big improvement, combined with our pressure hose kit the improvement is huge! Our pressure hoses have significantly better airflow than stock piping, verified by extensive testing both in the car and in our SuperFlow SF-1020 flow bench.

Significant benefits with do88 BigPack (OEM intercooler/pipes):
– Core volume: 15347 cm3 (7719 cm3), do88 is 99% larger!
– Airflow at 0.15bar/2.18 psi pressure drop: 325 CFM (239 CFM), do88 36% more! See the diagram below!
– Post intercooler air temperature at the same conditions: 24°C (36°C), do88 12°C lower! See the diagram below!

The BigPack includes an all-aluminum high-performance intercooler and a complete kit of 2.5"" hoses and silicone hoses. This BigPack replaces everything between the turbo outlet and the throttle body, hence the dramatic improvement in airflow and cooling performance.

The do88 high-performance intercooler is an all-aluminum construction. With CAD designed and flow optimized cast end tanks along with an optimized core design, it achieves the best possible cooling efficiency combined with the lowest possible pressure drop!

The pressure tubes are made of 2.5"" mandrel-bent seamless aluminum tubes.

Custom made high quality silicone ubi with 4 layers of polyester/aramid reinforcement. These hoses can withstand very high temperatures and pressures!

Always remember that the OEM intercooler was designed for the power level the car was originally built for. An increase in power or even very intense use of the car in the standard version could cause the OEM intercooler not to have the performance you need. So only after fine-tuning the engine software, the do88 BigPack will give an increase in performance compared to the OEM intercooler!

A common misconception is that an intercooler installed in this location cannot provide good performance and that a front-mounted intercooler/FMIC would be much better. But in reality the do88 BigPack is far better than most FMIC installations where you can only install a core with a small front surface, partially behind the bumper beam which will further reduce the cooling capacity and often results in worse cooling capacities than the OEM intercooler.

DO88 BigPack is supplied with all the hardware necessary for installation.

Parts included in this BigPack:
1. High performance intercooler
2. Pressure hoses 2 pieces
3. Four silicone tubes
4. Eight stainless steel clamps